Mighty Seal Product Application

 
 
1. Decide what size bead of caulk is needed for your job. Keeping in mind the size bead needed, cut nozzle at a 45° angle. When applying caulk, pull the caulking gun towards you rather than pushing it away. Cured bead should be between 1/8” to 1/2”. Use a closed cell foam backer rod or bond breaker tape for joints that exceed ½” in depth to avoid 3 point adhesion.

2. Smooth bead with a moistened cloth.

3. Clean up uncured material and tools with soap and water.

4. Allow 4 to 6 hours curing time before applying paint. Compatible with most coatings such as acrylics, elastomeric coatings and oil based paint. See back panel for additional information. Mighty Seal™ is not formulated for use on pools, roofs, or areas subject to vehicular or heavy foot traffic. For roof applications, use Flexible
Comments